Now the deterioration of the environment has made a lot of panic. Some people don't know how to deal with the impact of the current replacement problem. Some people trust the humidifier, so they start the self-made process. We know that the humidifier has a strong purification function for the environment, and if the indoor environment is dusty, only one humidifier can immediately change the status quo Let the air become moist and moist.
I think it's very dry and fresh. I don't think it's so dry when I inhale the lungs. Now the environment is getting more and more severe, but humidifiers often appear in various families. A good humidifier may be very expensive, but its efficacy is also very good. Some may feel that it is too expensive to buy, but it can also be made by oneself and the production method is very simple.
Ultrasonic atomizer is the most important part of self-made air humidifier. There are many manufacturers producing ultrasonic atomizer on the market, but the most easy to buy is the atomization movement used in decorative lamps. The power of this kind of movement is generally 24W, and the atomization amount is within 300cc / har. Therefore, the water mist generated by the operation may be slightly lower than that of the finished products on the market. After buying the movement, don't think it's finished. We also need a water container for humidifier. Since the position of the humidifier generating water mist is usually near the sleeping area, the movement of the atomizer should not be too far away from the sleeping area. In other words, we can not choose containers that are too deep. Therefore, it is recommended to use a larger opening, if you have a small plastic basin at home, you don't need to buy it.
We connect the atomizer with the transformer, put the atomizer in the beautiful tray with water. The water must be higher than the atomizer to avoid dry burning. When the atomizer is put into the water, the water will be sprayed upward. There is also a set of plastic bracket in the packaging box of the atomizer. This bracket is used to place a water blocking glass or plastic sheet on the top of the humidifier to prevent water splashing during humidification.
The above is the process of self-made humidifier, now with the method of self-made humidifier, you don't have to worry about it. You can use the humidifier quickly with simple materials and a few steps, without any high-cost material cost. It is suitable for your own use in the family, which is clean, sanitary and pollution-free, and the effect is absolutely beyond your imagination.
