How to clean the range hood
When most people clean the range hood, they are used to disassembling and cleaning, which is a waste of time and easy to damage parts. This paper introduces a cleaning method that does not need to disassemble the machine and is very time-saving and labor-saving.
1. Take a plastic bottle (all kinds of beverage bottles that can be flattened by hand) and punch more than 10 holes on the cover with a sewing needle. Then, put in an appropriate amount of detergent, and then fill it with warm hot water and shake it evenly.
2. Start the range hood and spray the cleaning solution to the part to be washed with the plastic bottle filled with detergent. At this time, the oil and dirty water can flow into the oil storage tank and pour when it is full.
3. After the cleaning solution in the bottle is used up, continue to prepare and clean repeatedly. Until the outflow of dirty water becomes clear, depending on the degree of scale, general cleaning 3 times can be washed clean.
4. If a net cover is installed outside the fan blade, the net cover should be removed first to enhance the washing effect.
5. Wipe the area around the air inlet, the surface of the shell and the lampshade with a rag.
Methods to prevent oil pollution in kitchen gas pipeline:
Users of buildings using pipeline gas will encounter this situation: the oil stains adhered to the gas pipeline are thick and difficult to remove. Here are some preventive measures:
1. First, thoroughly remove the oil from the gas pipe, and then use the waste calendar to cut a piece of paper (5cm) wide and wrap it along the gas pipe. This is not only beautiful and elegant, but also very convenient to exchange if the paper is dirty.
2. After the range hood is used, the oil basin should be cleaned up, and the plastic bag used for wrapping sweet orange can be put into the oil box, which is close to the box wall. When the box is full of oil, remove the bag filled with oil and replace it with a new one. This can not only solve the problem of dirty oil enterprises, but also make use of waste plastic bags to save time.
3. The waste oil in the oil box of lampblack can be used: now many family kitchens use range hood, and the oil box is full of waste oil in a few days. It is the best "degreasing agent" to remove stains on kitchen window lattice, ventilator and range hood. Specific method: dip in the waste oil with rag or towel, and then wipe the oil with cloth, and then wipe it with clean cloth. Articles with thick oil stain can be soaked in waste oil for a few seconds, and then can be wiped off with cloth after the oil softens (especially thick ones need to be scraped with thin bamboo board.)
In addition, doors and windows are connected with iron hinge, often open and close wear is very serious, you can use a small stick to the waste oil on the hinge shaft, not only prolong the life of the hinge, but also reduce the noise.
What are the precautions for cleaning range hood
Range hood can be said to be one of the essential household appliances in modern family kitchen. The performance and convenience of range hood largely determine the air quality and the health of housewives, so it can not be ignored. If the range hood is used for a long time, its surface and inner cavity will be full of oil, which will affect its normal smoke exhaust effect. Therefore, cleaning the range hood regularly and correctly is the prerequisite to ensure the normal operation of the range hood.
1. First, cut off the power supply of range hood to ensure personal safety.
2. The shell surface and net cover of the range hood are cleaned with a small amount of warm water with neutral detergent dipped in soft cloth. Dry with a dry soft cloth.
3. Dismantling and cleaning of the inner cavity of the wheel and volute:
(1) screw off the screws of the cover plate and the net cover, and remove the cover plate and the net cover.
(2) Then screw off the fastening screw of the wind wheel and take out the wind wheel.
(3) Soak the removed parts in warm water with neutral detergent, wash them with soft cloth and wipe them dry.
(4) Use a soft cloth with a small amount of warm water with neutral detergent to wipe the dirt in the volute cavity, and then clean it with a soft cloth and wipe it dry.
(5) Install the above components in the reverse order of disassembly.
(6) After installation, check whether the oil circuit of the appliance is smooth and whether the sealing ring on the volute can be sealed.
4. The precautions for cleaning impeller and volute are as follows:
(1) during cleaning, water cannot enter into the motor and electrical parts.
(2) When cleaning, do not pull the internal connecting wire with force, otherwise it will loosen the connection point and cause electric shock hazard.
(3) It is forbidden to use alcohol, banana water, gasoline and other flammable solvents to clean range hood in order to prevent fire accidents.
(4) When cleaning, wear rubber gloves to prevent sharp edges of metal parts from hurting people.
(5) The removed parts should be handled with care to avoid deformation. When cleaning the impeller, be careful not to touch or move the counterweight of the blade, otherwise, the vibration and noise of the whole machine will be increased.
For those range hood with filter cover, as the fume has been filtered before entering the appliance, the internal structure of the range hood does not need to be cleaned. It is only necessary to clean the appliance shell and filter screen cover according to the cycle specified in the manual.
5. Cleaning of the filter cover:
(1) screw out the fixing screws.
(2) Soak the removed filter cover in warm water of neutral detergent for 5-10 minutes.
(3) Use a soft plastic brush to clean the dirt in the pores of the filter screen, and then dry it with a dry cloth.
(4) After installation, check whether the oil circuit of the appliance is smooth and whether the sealing ring on the volute can be sealed.
