Bath cleaning tips:
Tip 1: fill the bathtub with warm water 2 inches above the highest nozzle, or leave the water in the tub after use. Add two teaspoons of low foam in water: powdered automatic dish detergent and a small amount of household bleach. Turn the Jacuzzi on for 5 to 10 minutes, then turn off, drain the water, and rinse the surface of the tub with water. The bathtub is in a hot and humid state for a long time, and many bacteria will grow. Sometimes after cleaning, the surface looks clean, but there are still many bacteria. China Cleaning network recommends regular use of boiling water to wipe the surface of the bathtub, do not use disinfection water casually, because disinfection water may not kill mold and fungi.
Skill 2: timely repair wounds, bathtub installation, do not move privately, need to move the position, must contact professionals. Do not knock or impact the surface with hard objects, which may cause bruises or scratches. If you need to repair the dull or scratched parts of acrylic bathtub, you can use clean cloth mixed with colorless automatic grinding solution to wipe hard, and then apply a layer of colorless protective wax. Please do not wax the foot area to prevent slipping.
Tip 3: mild treatment of surface stains can be used to brush the surface with an abandoned soft bristle toothbrush dipped in bleach water, which can not only remove stains, but also eliminate mold. In case of difficult stains, you can also use half a lemon dipped in salt, or you can use a soft toothbrush coated with whitening toothpaste to scrub. Turpentine is also very good at this time. For scale, the products used to clean the toilet are easy to use. If you don't like the pungent taste, you can also use lemon and white vinegar as a natural method. Do not use a detergent with fading function, especially when the bathtub at home is colored. To deal with mold and bacteria causing fungal disease, rinse with bleaching powder water and peroxide water, and then wipe dry immediately.
Skill 4: deal with pipe blockage at any time and disinfect it on time. The pipeline should be cleaned once or twice a week to remove the smell and prevent the growth of bacteria. : you can use the special product to clean the sewer, pour it into the sewer, and clean it after 5 minutes. Pay attention not to use it in the metal pipe. If the bathtub is blocked, you can first turn off the water valve, and then put a proper amount of tap water in the bathtub; place the rubber suction device (used to dredge the toilet) on the water valve; while opening the water valve, block the overflow hole of the basin or bathtub; then quickly draw up and down to suck out the dirt or hair and clean it up in time. In the case of serious blockage, it can be repeated several times until the dredging is clean.
Cleaning precautions:
Avoid the use of dark cleaner, easy to cause pigment into the cylinder surface. To tighten the water tap, so as to avoid frequent dripping and water accumulation in the bathtub. Do not leave metal objects in the bathtub, or the surface of the bathtub will rust and dirty.
